Fundamentals of Electrical Control Circuits

In this course, we focus on industrial, electrical basics, power and control circiut,we will start with the absolute basics of electrical circuits. We look at the fundamentals ofresistive circuits.

The course looks at the different types of control circuits and where they come from in the real world, focussing onReading Electrical Drawings. As this is a course on the fundamentals of electrical controls, we will go through the basics of control circuits such as,normally open and normally closed, and look at how controlsare made up ofseries and parallel circuits.

1- General knowledge about the principles of electricity
2 - Identify the types of electrical connections(single- triple)
3- Identifying the operation method and components of the contactor
4 - Identify the components of the main and control circuits
5 - identify the operation way of control circuitscomponents.
6- Ability to read electrical drawings.
7- Ability to design some control circuits

This training programme is suitable to a wide range of professionals but will greatly benefit:

Electrical Engineers, Electrical Technicians , Maintenance Technicians , Electrical Installations

1. INTRODUCTION TO ELECTRICITY
2. ELECTRICAL BASICS
3. INTRODUCTION TO POWER &CONTROL CIRCUITS
4. EXPLAIN THE PARTS OF THE CONTACTOR AND HOW IT WORKS
5. EXPLANATION AND HOW TO DO THE FOLLOWING
   1. Relay
   2. Timer
   3. Push Button switch
   4. Protection elements in electrical circuits

( CB - O.L – Fuse – R.C.C.B )

1. EXPLANATION OF READING ELECTRICAL DRAWINGS ( SINGLE LINE DIAGRAM & THREE LINE DIAGRAM )

• Presentation & Slides
• Audio Visual Aids
• Interactive Discussion
• Participatory Exercise
• Action Learning
• Class Activities
• Case Studies
• Workshops
• Simulation