Technical / Electrical Engineering

Wishlist

Voltage Regulators, Capacitors, Reactors & Reclosers

TE199

No Schedule Course Found, You can Request Schedule or ask for a proposal to get as in-House for your team. Request eProposale

Utilities are required to provide power to their customers within a specific range of voltage. Voltages that are outside of that range may damage equipment or cause it to operate inefficiently. For example, voltage that is significantly lower than the desired range may cause lights to dim and motors to burn out. Voltage that is significantly higher may cause lights or appliances to fail prematurely. In an ideal ac power system, the voltage and frequency at every supply point would be constant and free of harmonics, and the power factor would be unity. In particular these parameters would be independent of the size and characteristics of consumers' load. In an ideal system, each load could be designed for optimum performance at the given supply voltage, rather than for merely adequate performance over an unpredictable range of voltage. Moreover, there could be no interference between different loads as a result of variations in the current taken by each one.

Describe why voltage regulation is needed in a transmission and distribution system

 Explain the Effect of Raising Voltage at the Substation Bus

 Identify the main components of automatic voltage regulator

 Identify the principle of operation of the auto reclosure

 Explain the typical locations of auto-reclosure on the distribution system

 Identify the advantages of installing auto-reclosures on the distribution system

 Describe how a sectionalize operates in a reclosure circuit

 Describe how an automatic voltage regulator adjusts voltage

In general, electrical power engineers, supervisors and qualified distribution system technicians can which work in substation and operation & maintenance of distribution department take part in this course.

INTRODUCTION

1.1 Describe why voltage regulation is needed in a transmission and distribution system

1.2. Voltage Standards

1.3. Factors affecting voltage drop along distribution feeders

1.4. The Effect of Raising Voltage at the Substation Bus

1.5. The effect of load power factor on line voltage drop

1.6. Functional of the capacitor in raising voltage

1.7. Purpose of auto-reclosure (ACR)

3.2.2 Identify the main components that enable a step voltage regulator to adjust voltage

3.2.3 Describe how an automatic voltage regulator adjusts voltage

7.4 Physically Disconnecting the Regulator

7.5 Regulator Installation

2. 1-PHASE & 3-PHASE REGULATORS

3. SHUNT & SERIES CAPACITORS

4. SHUNT & SERIES REACTORS

5. CIRCUIT RECLOSERS

  • Presentation & Slides
  • Audio Visual Aids
  • Interactive Discussion
  • Participatory Exercise
  • Action Learning
  • Class Activities
  • Case Studies
  • Workshops
  • Simulation

Terms & Conditions

ACTrain reserves the right to alter the Course Schedule without Prior Notification, Fees Quoted are Subject to Terms & Conditions Outlined in ACTrain's Registration Policy

SAVE

With Group Discount

Upcoming Courses